# network interface settings; autogenerated # Please do NOT modify this file directly, unless you know what # you're doing. # # If you want to manage parts of the network configuration manually, # please utilize the 'source' or 'source-directory' directives to do # so. # PVE will preserve these directives, but will NOT read its network # configuration from sourced files, so do not attempt to move any of # the PVE managed interfaces into external files! auto lo iface lo inet loopback auto ens18 iface ens18 inet manual # Karte 10GBPS auto ens19 iface ens19 inet manual auto ens20 iface ens20 inet static address 10.2.99.XXX/24 #Corosync Link 0 auto ens21 iface ens21 inet static address 10.3.99.XXX/24 #Corosync Link 1 auto ens22 iface ens22 inet manual auto ens23 iface ens23 inet manual auto bond0 iface bond0 inet manual bond-slaves ens18 ens19 bond-miimon 100 bond-mode active-backup bond-primary ens18 #Bond0 nach aussen auto bond1 iface bond1 inet manual bond-slaves ens22 ens23 bond-miimon 100 bond-mode active-backup bond-primary ens22 #Bond1 zum Ceph Storage auto vmbr0 iface vmbr0 inet static address 10.1.99.XXX/24 gateway 10.1.99.254 bridge-ports bond0 bridge-stp off bridge-fd 0 #Bridge nach aussen source /etc/network/interfaces.d/* auto vmbr1 iface vmbr1 inet static address 192.168.127.254/24 bridge-ports none bridge-stp off bridge-fd 0 pre-up iptables -t nat -A POSTROUTING -s '192.168.127.0/24' -o vmbr0 -j MASQUERADE pre-up echo 1 > /proc/sys/net/ipv4/ip_forward post-down iptables -t nat -F # END ANSIBLE MANAGED BLOCK auto Ceph_public iface Ceph_public inet static address 10.4.99.XXX/24 vlan-id 50 vlan-raw-device bond1 #Ceph_public auto Ceph_cluster iface Ceph_cluster inet static address 10.5.99.XXX/24 vlan-id 51 vlan-raw-device bond1 #Ceph_cluster